July 6, 2021

All about VCA

VCA stands for (in Dutch) Safety, Health and Environment Checklist for Contractors, but it is much more than that. VCA is a versatile and complete programme whereby vca cursus online service-supplying companies may be tested in a structured and objective manner, and certified for their VGM administration system. VGM (Dutch) stands for Safety (Veiligheid), Health (Gezondheid), Environment (Milieu).

VCA and Certification
VCA stands for VGM Checklist Contractors (VGM = Safety, Health and Environment). The checklist is an extensive list of questions that is used as an investigation and screening system for contractors who Carry out work for others. In fact, VCA is regarding green checklist. It is a versatile and complete programme whereby service-supplying companies may be tested in a structured and objective manner, and certified for their VGM administration system.

Purpose and Necessity
Summing in the subjects in the so-called “checklist questions” reveals that VCA is intended to research your company on critical points for Safety, health and environmentally-friendly working practices. If your company meets the mandatory standards, a VCA certificate may be obtained.
The VCA -certificate is a useful means of showing at once that your company meets the standard requirements on a large number of points regarding Safety, health and environment. This ensures that the customer and contactor do not need to perform all sorts of steps to ensure that Safety, health and environment are protected. That was already taken care of beforehand. From the usefulness of the certificate, the requirement of the possessing the certificate exists. Because of the convenience, customers simply require the ownership of the VCA certificate as a condition for those who wish to use work for them.

Objective and Structured
Safety, health and environment are, for the (petro-)chemical industry and there are others very important points of attention. As a result of restructuring in the industry work is increasingly issued to contractors. Because of this, the influence of these contractors on Safety, health and environment has greatly increased. Selection of good contractors is thus crucial for maintaining or improving the quality of Safety, health and environment. VCA delivers an important contribution, since it ensures that contractors who have their VGM-administration system well organized can be certified. The certification itself is done on the basis of a checklist, by a certification organisation (CI).
A buyer who assigns risk-laden work to a contractor with a VCA certificate may assume that the work will be carried out such as to ensure that Safety, health and environment will not be put in danger. An impartial and objective investigation, by a realised certification organisation, has recently demonstrated this. The VGM-administration system conforms with the minimum requirements and is applied in a structured manner, with constant awareness of VGM and with good results (including a low frequency of accidents).
An important area of VCA is that there is an annual be sure the certificate holder (contractor) still conforms with all the VCA requirements. The contractor is, as it were, “under supervision” of the certifying organisation that issued the certificate.

Origin of the VCA -system
The current certification system is the result of a development process started in 1989 via the National Workgroup for Contractor Safety (Landelijke Werkgroep Contractor Veiligheid). In this workgroup, with representatives from primarily the petro-chemical industry, the idea was made to set up a uniform and objective system that would enable the likelihood of checking contractors on their Safety policies and performance. After involvement by representatives from the contractors this led to a checklist that, following a trial period in the Europoort-Botlek area under the auspices of the Stichting Europoort Botlek Belangen (now Deltalinqs), is accepted throughout the industry as a uniform system and industry standard.

Organisation of the VCA -system
In 1994, to help relieve a broader (national) introduction, the machine was brought under the independent Stichting Samenwerken voor Veiligheid, with the Centraal College vehicle Deskundigen VCA (CCVD- VCA ) as performing organ. This college administers the machine in terms of quality and supervises the correct application of the system and procedures.

Additionally, the machine has been brought under the Raad voor Accreditatie. This is to ensure objectivity, to check the certification organisation for sufficient expertise and to ensure correct performance of the procedures and provide an impartial complaints procedure. The benefit is that the system (the so-called certification-schema) also conforms with the requirements of the Western european norms which helps international application, and mutual recognition between The european countries is made easier (European standards are complied with).

The collective burden of Safety for employers and contractors is also included in a number of legal requirements (Working conditions law).

Which is activities is VCA intended?
The VCA -certificate is intended for companies that carry out try a raised level of risk (from the viewpoint of the employer). This work often occurs in industrial facilities, installs and at workplaces and project locations.

Some situations are:

mechanical engineering activities, for example:
maintenance work
electro-technical and process control, for example:
maintenance of process control systems
maintenance of electrical systems
industrial work
other technical services, such as:
isolation (removing/applying)
scaffolding, industrial scaffolding construction
industrial cleaning
directory transport, horizontally transport, lifting vehicles
fire and manhole guards, Safety guards
evaluation work (x-rays etc. )
If the company to be certified for VCA has multiple twigs (head side, daughter branches), the certifying organisation’s audit should be carried out as if each side requires a separate certificate. When one side does not (any longer) fulfill the VCA requirements, the certificate becomes ill for the whole company. When it is the purpose that the VCA certificate should only affect a restricted number of a companies twigs, only these twigs should be mentioned on the VCA certificate. Naturally, each head or bass speaker side may also be certified separately, if the side in question meets the VCA requirements.

If the company to be certified for VCA has multiple organisational units, the same rules apply as for a company with multiple twigs (see above).

Advantages for the contracter
For some employers VCA is often a requirement to become permitted to make an offer or be given a contract.
VCA gives an advantage over non-certified contractors.
Contractors have no longer to be concerned with all sorts of Safety requirements, investigations and systems thought up in the past by various employers, that could lead to a great deal of double work, also and in particular regarding training and instruction. One can now depend on just one checklist.
The VCA is a widely realised, uniform checklist that has replaced a large diversity of Safety check-lists and methods.
VCA gives a clear structure: the contractor can focus on improving his VGM control system and its performance in a realised system.
VCA involves handy, practical tips and measures.
Since VCA is applied under formal accreditation rules, contractors are ascertained of an honest, independent, professional evaluation by a certificate organisation (CI). The CI is under the direction of the Raad voor Accreditatie (the Netherlands), Belcert (Belgium) or TgA (Germany).
The VCA -certification process has similarities to the ISO 9000-systems and -audits. VCA is also supportive of the management systems and audits, such as ISO 14001 and OHSAS 18001. By application of the VCA certification process, the VGM control system of the contractor can program efficiently with the VGM system of the employer.
VCA is an international system, applied and realised in multiple EUROPEAN member states.
Since VCA has been developed and is administered by the Dutch and Belgian industry, all VCA users can be reassured that it will remain a practical system. In addition, VCA is not a bureaucratic system and does not involve a great admin burden; it clearly offers added value.

Advantages of VCA certification for the employer
VCA offers a clear structure for the contractor’s VGM systems. The employer therefore knows what may be expected from a contractor who is VCA certified.
Contractors must themselves take responsibility for the setup and administration of their VGM systems.
Through the synergy between employer and contractor the entire quality and efficiency of the organisation will improve and result in fewer accidents and less damage to company and environment.
A VGM investigation by the employer won’t be necessary or may be limited to the evaluation of the projects or work carried out.
More tasks and responsibilities can be delegated to certified contractors since the contractors are competent establishments, with well trained and VGM qualified employees.
VCA attaches with the employer’s VGM control system (see also VCO: VGM Checklist Employers. )
The contractor speaks the same “language” if it is about Safety, health or environment.
The VCA -certification process has similarities to the ISO 9000-systems and -audits. VCA is also supportive of the management systems and audits, such as ISO 14001 and OHSAS 18001. By application of the VCA certification process, the VGM control system of the contractor can program efficiently with the VGM system of the employer.
Advantages of VCA certification for the employee
The employer (contractor) demonstrates that VGM is taken seriously.
Employees may expect a safe and healthy working environment in a VCA certified company.
Since the employee is required to demonstrate that she is well trained and qualified, he may assume that persons with whom he works on risk-carrying work are also well trained and qualified.
A diploma or degree or personal certificate, containing the VCA logo, is a valuable document for the holder. It is an formally recognized affirmation that demonstrates that the holder is a professional, safely-working craftsman.
A VCA qualified employee or manager has a higher market value.
There is less chance of accidents and injuries on the work floor, so one returns home healthy and safe!

Advantages of VCA certification for all parties and the community
Fewer injuries, less time off as a result of accidents, less persons unable to work, lower chance of misfortunes, more attention for the environment. In short: a safe(r) and healthier work environment.

Leave a Reply

Your email address will not be published. Required fields are marked *